APPLICATION INSTRUCTIONS

  • Before starting work, measure the room(s) carefully, calculate the area of the target surfaces and buy 10% more material than is theoretically required, with a sufficient supply of the primer, adhesive, pointing compound and impregnant.
  • The variation of colors within a single box is intentional as it adds a natural look to the façade. Take tiles from a few boxes one by one to distribute tile tints evenly.
  • Ambient temperature during, and within 48 hours after, the application should stay within the +5oC to +25oC range.
  • Because some information may not apply to certain tile types, please read the instruction from the package before proceeding with your work.
  • WARNING: STEGU shall not be liable for any consequences of incorrect tile application and all claims involving sizes or colors ‘as laid’ are expressly excluded.

TARGET SURFACE

  • All the target surfaces should be correctly conditioned. They should be strong enough, uniformly textured, even, dry and free from any loose material, residues of paints, antiadhesive agents and grease.
  • Prime the target surface with, for instance, the STEGU PRIMER.

BONDING

  • All the target surfaces should be correctly conditioned. They should be strong enough, uniformly textured, even, dry and free from any loose material, residues of paints, antiadhesive agents and grease.
  • It is best to start from the bottom, resting the first row of tiles on the surface. If there is no even and horizontal support for tiles, mount a reference leveling screed on the wall using a mason’s level and a rule on a height not exceeding the height of a single row of tiles above the floor or ground.
  • It is best to offset one row of tiles vs. the rows beneath and above (to avoid aligning the tiles/joints vertically).
  • Apply the ELASTIK adhesive by following the instruction provided on the adhesive package.